Another project completed!
Last year the water pump had an intermittent fault causing the engine to overheat.
As well a replacing the pump, a new exhaust temperature alarm has been fitted.
Any further failures at least we will have an early warning.
March 2015
Connect the GPS128’s blue wire to the Icom’s central core. Connect the Icom’s outer core to the Garmin’s ground (black wire). You’ll need to check that the Garmin is set up to output NMEA (look at the Interface page and set it for either NMEA/NMEA or None/NMEA.
Garmin 128
Need to check this is set to outpu NMEA, by default it is set to Garmin
ICOM IC-505
YBW Thread:
http://www.ybw.com/forums/showthread.php?424925-ICOM-IC-505-direct-to-GPS&p=5210968#post5210968
Success:
Recent Comments